The TLV SC1 steam compressor maximizes steam utilization by recovering excess low-pressure steam at a higher pressure, resulting in reduced energy costs and CO2 emissions. It is designed to reuse energy from excess steam by increasing it to low or medium pressure.

Features

• Reuses energy from excess steam by increasing it to low/medium pressure.
• No electricity required, making it suitable for explosion-proof areas (when equipped with COS pressure control valve).
• Condensate recovery tank is unnecessary with the optional condensate recovery package: condensate is first reduced to atmospheric pressure, then repressurized to mid-pressure steam for reuse.
• Employs a new, independently-designed high-efficiency ejector.
• The pressure control valve has a built-in separator and steam trap, maintaining dry motive steam and ensuring high long-term efficiency and stable discharge pressure.

Pressure Equipment Directive (PED)

This product fully conforms to the requirements of the Pressure Equipment Directive (PED, 2014/68/EU) and features CE marking where applicable.

Specifications

Model	Motive Inlet	Discharge Outlet	Suction Inlet	Max Operating Pressure (PMO)
SC1-1	DN 25	DN 80	DN 80	16 barg
SC1-2	DN 25	DN 80	DN 80	20 barg
SC1-3	DN 25	DN 80	DN 80	16 barg

Note: Products exceeding specifications shown above may be able to be supplied depending on conditions. 1 bar = 0.1 MPa.

WARNING

Maximum Allowable Pressure (PMA): 16 barg (COS/CV-COS), 20 barg (CV10) Maximum Allowable Temperature (TMA): 220 °C To avoid abnormal operation, accidents or serious injury, DO NOT use this product outside of the specification range.

Dimensions